Fire Door & Shutters

 

Fire Rated Shutter Panel 286x300 97x102Fire Shutters are similar to conventional steel slatted and galvanised steel roller shutters that operate vertically, closing in the event of a fire. Our fire shutters are available in safety ratings of up to 4 hours. One of the main benefits of Fire 
shutters is there ability to act as a means of physical security during normal use and a fire safety shutter in the event of a fire.

Security and fire protection combined – available in one, two or four hour ratings.

A Fire Shutter is an electrically operated vertical fire shutter, consisting of a steel slatted curtain and galvanised steel box assembly and guide rails. The box, curtain, guide rails and bottom rail can be powder coated as an optional extra. 

Designed to be a security barrier during normal use and to be closed automatically during a test or an emergency situation. In the event of receiving a fire alarm signal the barrier will perform a powered descent to create a fire resistant barrier.

In the event of power failure Flame Shutter will close using the battery backup feature. Flame Shutters design allows for both face or reveal installations.Shutter1 133x135

Product Performance

This product is uniquely capable of providing specifiers with a choice of Flame Shutter 60, 120, or 240 minutes integrity performance in accordance with the standards mentioned above.
Available in three integrity ratings

  • Flame Shutter 60 (1 hour rated), Flame Shutter 120 (2 hour rated), Flame Shutter 240 (4 hour rated)

Size Limitations

Min/max width: 800 mm / 7000 mm, Min/max height: 800 mm / 4600 mm, Sizes can vary according to integrity rating and larger sizes require a hood support bracket. Please check for confirmation. Maximum sizes can vary according to integrity rating.

Approved Standards

Approved StandardsThe fire resistance performance of shutters to BS 476: Part 22: 1987. The fire resistance performance of shutters to BS EN 1634-1: 2008.

Maintenance Recommendations

There is a requirement under The Regulatory Reform (Fire Safety) Order 2005 for companies to ensure fire safety equipment

is maintained and a record kept.

  • Weekly: Check all the system for correct operation
  • 6 Months: Inspections and test of the systems by a competent engineer
  • Annually: Full inspections and test of the systems by a competent engineer, clean self-contained detectors and check or replace batteries